Linux下的USB总线、设备

Steven Yang
Email: defeattroy at gmail.com
Date: 2011-04-20系统的USB设备信息通过usbfs挂载在/proc/bus/usb下面，此目录下面有两种文件/proc/bus/usb/devices和/proc/bus/usb/BBB/DDD。/proc/bus/usb/BBB/DDD文件每一个连接的USB设备都有一个文件，BBB指示bus number，DDD指示设备在这个总线上的地址。这些文件可以当作二进制数据读取，内容包括设备描述和设备配置描述。这些信息在/proc/bus/usb/devices里面也有。这些文件可以被用来写用户层的USB设备驱动，可以打开/proc/bus/usb/BBB/DDD进行读写，读到其相关描述确定是不是你期望的设备，如果是，使用ioctl函数把它bind到一个（或几个）接口上。注意只有root才能访问BBB/DDD文件，所以也只有root能写这些用户层的驱动。当然可以利用chmod改变权限或者在mount usbfs的时候利用devmode选项，例如"devmode=0666"/proc/bus/usb/devices文件该文件中每个设备的输出占多行，每行的含义如下：T = Topology （etc.）
B = Bandwidth （applies only to USB host controllers, which are
    virtualized as root hubs）
D = Device descriptor info.
P = Product ID info. （from Device descriptor, but they won"t fit
    together on one line）
S = String descriptors.
C = Configuration descriptor info. （* = active configuration）
I = Interface descriptor info.
E = Endpoint descriptor info./proc/bus/usb/devices文件的格式如下=======================================================================/proc/bus/usb/devices output format:Legend:
d = decimal number （may have leading spaces or 0"s）
x = hexadecimal number （may have leading spaces or 0"s）
s = string
Topology info: T: Bus=dd Lev=dd Prnt=dd Port=dd Cnt=dd Dev#=ddd Spd=ddd MxCh=dd
|   |      |      |       |       |      |        |       |__MaxChildren
|   |      |      |       |       |      |        |__Device Speed in Mbps
|   |      |      |       |       |      |__DeviceNumber
|   |      |      |       |       |__Count of devices at this level
|   |      |      |       |__Connector/Port on Parent for this device
|   |      |      |__Parent DeviceNumber
|   |      |__Level in topology for this bus
|   |__Bus number
|__Topology info tag    Speed may be:
        1.5    Mbit/s for low speed USB
    12    Mbit/s for full speed USB
    480    Mbit/s for high speed USB （added for USB 2.0）
Bandwidth info:
B: Alloc=ddd/ddd us （xx%）, #Int=ddd, #Iso=ddd
|   |                       |         |__Number of isochronous requests
|   |                       |__Number of interrupt requests
|   |__Total Bandwidth allocated to this bus
|__Bandwidth info tag    Bandwidth allocation is an approximation of how much of one frame
    （millisecond） is in use. It reflects only periodic transfers, which
    are the only transfers that reserve bandwidth. Control and bulk
    transfers use all other bandwidth, including reserved bandwidth that
    is not used for transfers （such as for short packets）.    The percentage is how much of the "reserved" bandwidth is scheduled by
    those transfers. For a low or full speed bus （loosely, "USB 1.1"）,
    90% of the bus bandwidth is reserved. For a high speed bus （loosely,
    "USB 2.0"） 80% is reserved.
Device descriptor info & Product ID info: D: Ver=x.xx Cls=xx（s） Sub=xx Prot=xx MxPS=dd #Cfgs=dd
P: Vendor=xxxx ProdID=xxxx Rev=xx.xxwhere
D: Ver=x.xx Cls=xx（sssss） Sub=xx Prot=xx MxPS=dd #Cfgs=dd
|   |        |             |      |       |       |__NumberConfigurations
|   |        |             |      |       |__MaxPacketSize of Default Endpoint
|   |        |             |      |__DeviceProtocol
|   |        |             |__DeviceSubClass
|   |        |__DeviceClass
|   |__Device USB version
|__Device info tag #1where
P: Vendor=xxxx ProdID=xxxx Rev=xx.xx
|   |           |           |__Product revision number
|   |           |__Product ID code
|   |__Vendor ID code
|__Device info tag #2
String descriptor info: S: Manufacturer=ssss
|   |__Manufacturer of this device as read from the device.
|      For USB host controller drivers （virtual root hubs） this may
|      be omitted, or （for newer drivers） will identify the kernel
|      version and the driver which provides this hub emulation.
|__String info tagS: Product=ssss
|   |__Product description of this device as read from the device.
|      For older USB host controller drivers （virtual root hubs） this
|      indicates the driver; for newer ones, it"s a product （and vendor）
|      description that often comes from the kernel"s PCI ID database.
|__String info tagS: SerialNumber=ssss
|   |__Serial Number of this device as read from the device.
|      For USB host controller drivers （virtual root hubs） this is
|      some unique ID, normally a bus ID （address or slot name） that
|      can"t be shared with any other device.
|__String info tag Configuration descriptor info: C:* #Ifs=dd Cfg#=dd Atr=xx MPwr=dddmA
| | |       |       |      |__MaxPower in mA
| | |       |       |__Attributes
| | |       |__ConfiguratioNumber
| | |__NumberOfInterfaces
| |__ "*" indicates the active configuration （others are " "）
|__Config info tag    USB devices may have multiple configurations, each of which act
    rather differently. For example, a bus-powered configuration
    might be much less capable than one that is self-powered. Only
    one device configuration can be active at a time; most devices
    have only one configuration.    Each configuration consists of one or more interfaces. Each
    interface serves a distinct "function", which is typically bound
    to a different USB device driver. One common example is a USB
    speaker with an audio interface for playback, and a HID interface
    for use with software volume control.
Interface descriptor info （can be multiple per Config）: I:* If#=dd Alt=dd #EPs=dd Cls=xx（sssss） Sub=xx Prot=xx Driver=ssss
| | |      |      |       |             |      |       |__Driver name
| | |      |      |       |             |      |          or "（none）"
| | |      |      |       |             |      |__InterfaceProtocol
| | |      |      |       |             |__InterfaceSubClass
| | |      |      |       |__InterfaceClass
| | |      |      |__NumberOfEndpoints
| | |      |__AlternateSettingNumber
| | |__InterfaceNumber
| |__ "*" indicates the active altsetting （others are " "）
|__Interface info tag    A given interface may have one or more "alternate" settings.
    For example, default settings may not use more than a small
    amount of periodic bandwidth. To use significant fractions
    of bus bandwidth, drivers must select a non-default altsetting.    Only one setting for an interface may be active at a time, and
    only one driver may bind to an interface at a time. Most devices
    have only one alternate setting per interface.
Endpoint descriptor info （can be multiple per Interface）: E: Ad=xx（s） Atr=xx（ssss） MxPS=dddd Ivl=dddss
|   |        |            |         |__Interval （max） between transfers
|   |        |            |__EndpointMaxPacketSize
|   |        |__Attributes（EndpointType）
|   |__EndpointAddress（I=In,O=Out）
|__Endpoint info tag    The interval is nonzero for all periodic （interrupt or isochronous）
    endpoints. For high speed endpoints the transfer interval may be
    measured in microseconds rather than milliseconds.    For high speed periodic endpoints, the "MaxPacketSize" reflects
    the per-microframe data transfer size. For "high bandwidth"
    endpoints, that can reflect two or three packets （for up to
    3KBytes every 125 usec） per endpoint.    With the Linux-USB stack, periodic bandwidth reservations use the
    transfer intervals and sizes provided by URBs, which can be less
    than those found in endpoint descriptor.

Linux下时间戳格式和标准时间格式的转换Windows 7下硬盘安装Ubuntu 11.04相关资讯 Linux教程

Linux教程：如何在命令行中查看目（07/28/2014 12:22:23）
Linux 修改root密码（11/03/2012 07:53:38）
su - root 与su root的区别（06/06/2012 00:39:40）

Linux进程间通信：消息队列（01/28/2013 09:43:00）
U盘安装Linux开机无法启动解决方法（10/07/2012 08:55:52）
Windows 7/Linux 同步时间（05/15/2012 06:17:55）

本文评论查看全部评论（0）