使用route命令。像ifconfig, route, ip等这些工具参数非常多,有问题时应该看看这些工具的参数。窗口大小的变动对FTP等程序性能影响很明显。[root@ww.linuxidc.com ipv4]# route del -net 10.60.56.0/24
[root@ww.linuxidc.com ipv4]# route add -net 10.60.56.0/24 window 4096 dev eth0
[root@ww.linuxidc.com ipv4]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.60.56.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
0.0.0.0 10.60.56.254 0.0.0.0 UG 0 0 0 eth0
[root@ww.linuxidc.com ipv4]# netstat -r
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
10.60.56.0 * 255.255.255.0 U 0 4096 0 eth0
169.254.0.0 * 255.255.0.0 U 0 0 0 eth0
default 10.60.56.254 0.0.0.0 UG 0 0 0 eth0 [root@ww.linuxidc.com ipv4]# route del default gw 10.60.56.254
[root@ww.linuxidc.com ipv4]# route add default gw 10.60.56.254 window 4096 dev eth0
[root@ww.linuxidc.com ipv4]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.60.56.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
0.0.0.0 10.60.56.254 0.0.0.0 UG 0 0 0 eth0
[root@ww.linuxidc.com ipv4]# netstat -r
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
10.60.56.0 * 255.255.255.0 U 0 4096 0 eth0
169.254.0.0 * 255.255.0.0 U 0 0 0 eth0
default 10.60.56.254 0.0.0.0 UG 0 4096 0 eth0 还需要关掉scalable,即:
[root@ww.linuxidc.com ipv4]# echo 0 > /proc/sys/net/ipv4/tcp_window_scaling如果希望这个更改在重启后也生效,可以将下面这一行添加到/etc/sysctl.conf文件中:
net.ipv4.tcp_window_scaling=0 Ubuntu中文智能拼音输入法配置Linux 查看Tomcat日志文件相关资讯 Linux教程
- Linux教程:如何在命令行中查看目 (07/28/2014 12:22:23)
- Linux 修改root密码 (11/03/2012 07:53:38)
- su - root 与su root的区别 (06/06/2012 00:39:40)
| - Linux进程间通信:消息队列 (01/28/2013 09:43:00)
- U盘安装Linux开机无法启动解决方法 (10/07/2012 08:55:52)
- Windows 7/Linux 同步时间 (05/15/2012 06:17:55)
|
本文评论 查看全部评论 (0)