Ubuntu 下安装Thinkpad T400硬盘保护APS

今天终于把这个问题搞定，记录下，网上那些文章说得不全，主要是给的网址下不了文件。在XP下安装APS很简单，直接安装就好。在Ubuntu下就比较麻烦了，一直以来就想解决这个问题，在网上也搜了一些资料看，如：http://www.linuxidc.com/Linux/2011-05/35320p2.htm试着做了下，都不成功。今天下了决心一定要把这个问题解决，就完全按照资料的顺序全部重新做一遍，一直到使用$ sudo hdapsd -d sda -s 15 -a -v -y来显示数据都是成功的，下一步$ wget http://www.unet.univie.ac.at/~a0604095/hdapsd这里就下载不了hdapsd这个文件，就通过下deb包，把hdapsd分离出来，并且需要两个不同的hdapsd文件，一个位于/etc/init.d/，另一个位于/etc/default/（末尾附这两个文件代码），然后，必须要执行$sudo /etc/init.d/hdapsd restart才能正常工作，不可能每次开机都去输入这条命令吧。于是要使它开机自己运行，要把它放在/etc/rc2.d/下面，做一个软链接$sudo ln -s /etc/init.d/hdapsd /etc/rc2.d/S99hdapsd问题全部解决，开机自动工作，保护硬盘。附:/etc/default/hdapsd:# hdapsd default file# start hdapsd at boottime？START="yes"# the name of the disk device that hdapsd should monitor.## usually this is "hda" for the primary IDE master or "sda"# for the primary S-ATA driveDISK="sda"# sensitivitySENSITIVITY=15# other options to pass to hdapsd.# the -d $DISK, -s $SENSITIVITY, -b and -p $PIDFILE options are always passed.OPTIONS=""# The new interface in kernels >=2.6.28 sometimes wrongly detects HDAPS-capable# drives as not supported. Set this to "yes" to force-enable the feature.# Please be carefull with this setting！FORCEENABLE="no"
/etc/init.d/hdapsd#！ /bin/sh### BEGIN INIT INFO# Provides: hdapsd# Required-Start: $local_fs $remote_fs# Required-Stop: $local_fs $remote_fs# Default-Start: 2 3 4 5# Default-Stop: 0 1 6# Short-Description: initscript to start hdapsd# Description: This file starts the hdapsd daemon### END INIT INFO# Author: Evgeni Golov <sargentd@die-welt.net># Do NOT "set -e"# PATH should only include /usr/* if it runs after the mountnfs.sh scriptPATH=/sbin:/usr/sbin:/bin:/usr/binDESC="IBM Hard Disk Active Protection System （HDAPS） daemon"NAME=hdapsdDAEMON=/usr/sbin/$NAMEDAEMON_ARGS=""PIDFILE=/var/run/$NAME.pidSCRIPTNAME=/etc/init.d/$NAMESTART="no"DISK="sda"SENSITIVITY=15OPTIONS=""FORCEENABLE="no"# Exit if the package is not installed[ -x "$DAEMON" ] || exit 0# Read configuration variable file if it is present[ -r /etc/default/$NAME ] && . /etc/default/$NAME# Do we really want to start the daemon？[ "$START" = "yes" ] || exit 0# Load the VERBOSE setting and other rcS variables. /lib/init/vars.sh# Define LSB log_* functions.# Depend on lsb-base （>= 3.0-6） to ensure that this file is present.. /lib/lsb/init-functionsDAEMON_ARGS="-p$PIDFILE -d $DISK -s $SENSITIVITY -b $OPTIONS"if [ "$FORCEENABLE" = "yes" ]; thenDAEMON_ARGS="$DAEMON_ARGS -f"fi## Function that checks if /sys/block/$DISK/queue/protect# or /sys/block/$DISK/device/unload_heads exist#do_checkprotect（）{if [ ！ -f /sys/block/$DISK/queue/protect -a ！ -f /sys/block/$DISK/device/unload_heads ]; thenlog_warning_msg "Not starting $NAME: neither /sys/block/$DISK/queue/protect nor /sys/block/$DISK/device/unload_heads do exist, please read /usr/share/doc/hdapsd/README.Debian"exit 0fi}## Function that starts the daemon/service#do_start（）{# Return# 0 if daemon has been started# 1 if daemon was already running# 2 if daemon could not be startedstart-stop-daemon --start --quiet --exec $DAEMON --test > /dev/null || return 1start-stop-daemon --start --quiet --exec $DAEMON -- $DAEMON_ARGS || return 2# Add code here, if necessary, that waits for the process to be ready# to handle requests from services started subsequently which depend# on this one. As a last resort, sleep for some time.}## Function that stops the daemon/service#do_stop（）{# Return# 0 if daemon has been stopped# 1 if daemon was already stopped# 2 if daemon could not be stopped# other if a failure occurredstart-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAMERETVAL="$？"[ "$RETVAL" = 2 ] && return 2# Wait for children to finish too if this is a daemon that forks# and if the daemon is only ever run from this initscript.# If the above conditions are not satisfied then add some other code# that waits for the process to drop all resources that could be# needed by services started subsequently. A last resort is to# sleep for some time.start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON[ "$？" = 2 ] && return 2# Many daemons don"t delete their pidfiles when they exit.rm -f $PIDFILEreturn "$RETVAL"}## Function that sends a SIGUSR1 to the daemon/service#do_pause（） {start-stop-daemon --stop --signal 10 --quiet --pidfile $PIDFILE --name $NAMEreturn 0}case "$1" instart）do_checkprotect[ "$VERBOSE" ！= no ] && log_daemon_msg "Starting $DESC" "$NAME"do_startcase "$？" in0|1） [ "$VERBOSE" ！= no ] && log_end_msg 0 ;;2） [ "$VERBOSE" ！= no ] && log_end_msg 1 ;;esac;;stop）[ "$VERBOSE" ！= no ] && log_daemon_msg "Stopping $DESC" "$NAME"do_stopcase "$？" in0|1） [ "$VERBOSE" ！= no ] && log_end_msg 0 ;;2） [ "$VERBOSE" ！= no ] && log_end_msg 1 ;;esac;;pause）[ "$VERBOSE" ！= no ] && log_daemon_msg "Pauseing （8sec） $DESC" "$NAME"do_pause;;restart|force-reload）## If the "reload" option is implemented then remove the# "force-reload" alias#log_daemon_msg "Restarting $DESC" "$NAME"do_stopcase "$？" in0|1）do_startcase "$？" in0） log_end_msg 0 ;;1） log_end_msg 1 ;; # Old process is still running*） log_end_msg 1 ;; # Failed to startesac;;*）# Failed to stoplog_end_msg 1;;esac;;*）echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload|pause}" >&2exit 3;;esac:

Ubuntu 10.04安装Tinyos-2.x及TinyOS-1.xUbuntu 11.04 下 Firestarter 无法启动解决办法相关资讯 Ubuntu教程

Ubuntu教程 - 使用Ubuntu拷贝CD和（12/18/2013 14:38:16）
让Ubuntu 12.10支持RAR和7Z文件解（11/15/2012 18:51:50）
Windows 7硬盘安装Ubuntu 12.10图（11/03/2012 19:22:47）

完美安装Ubuntu 12.10最新AMD显卡（11/27/2012 08:17:47）
Win 7硬盘安装Ubuntu 12.10 （11/05/2012 13:30:34）
虚拟机上Ubuntu 11.10升级到12.04 （10/12/2012 20:00:38）

本文评论查看全部评论（1）

评论声明

尊重网上道德，遵守中华人民共和国的各项有关法律法规
承担一切因您的行为而直接或间接导致的民事或刑事法律责任
本站管理人员有权保留或删除其管辖留言中的任意内容
本站有权在网站内转载或引用您的评论
参与本评论即表明您已经阅读并接受上述条款

第 1 楼 whisky020 发表于 2011/7/23 15:04:31<<<<<来显示数据都是成功的，下一步
$ wget http://www.unet.univie.ac.at/~a0604095/hdapsd
这里就下载不了hdapsd这个文件>>>>>>这个步骤，我打开这两个位置的文件（/etc/default/hdapsd: