CentOS和openSUSE单网卡双ip配置记录

CentOS和openSUSE单网卡双ip配置记录：CentOS单网卡双ip
cp -p /etc/sysconfig/network-scripts/ifcfg-eth0 /etc/sysconfig/network-scripts/ifcfg-eth0:0
内容如下。eth0的ip是192.168.16.150网关是192.168.16.1
[root@localhost network-scripts]# cat ifcfg-eth0
DEVICE="eth0"
NM_CONTROLLED="yes"
ONBOOT="yes"
HWADDR=00:0C:29:73:7B:2A
TYPE=Ethernet
BOOTPROTO=none
IPADDR=192.168.16.150   eth0的ip
PREFIX=24
GATEWAY=192.168.16.1    eth0的网关
DNS1=114.114.144.144
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth0"
UUID=5fb06bd0-0bb0-7ffb-45f1-d6edd65f3e03
[root@localhost network-scripts]# cat ifcfg-eth0:0
DEVICE="eth0:0"
NM_CONTROLLED="yes"
ONBOOT="yes"
HWADDR=00:0C:29:73:7B:2A
TYPE=Ethernet
BOOTPROTO=none
IPADDR=192.168.1.150 eth0:0的ip
PREFIX=24
GATEWAY=192.168.1.1    eth0:0的网关
DNS1=114.114.144.144
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth0:0"
UUID=5fb06bd0-0bb0-7ffb-45f1-d6edd65f3e03 opensuse双卡配置#cat /etc/sysconfig/network/ifcfg-eth0
BOOTPROTO="static"
BROADCAST=""
ETHTOOL_OPTIONS=""
IPADDR="192.168.2.254/27"   eth0的ip
MTU=""
NAME="80003ES2LAN Gigabit Ethernet Controller （Copper）"
NETWORK=""
REMOTE_IPADDR=""
STARTMODE="auto"
USERCONTROL="no"
IPADDR_eth01="10.10.10.254"   eth0:0的ip
NETMASK_eth01="255.255.255.0"
LABEL_eth01="0" 配置文件改完，只需service network restart即可Linux上Vi（Vim）编辑器使用教程CentOS 6.2_X86_64系统定制详细版相关资讯 openSUSE教程

虚拟机中openSUSE系统静态ip配置工（05/14/2013 19:29:39）
Linux下N卡风扇转速控制（07/17/2012 10:18:18）
openSUSE 双显卡实现双屏显示（07/17/2012 10:15:12）

openSUSE下开机自动运行脚本命令的（09/21/2012 14:23:33）
Linux交换区swap重新划分（07/17/2012 10:16:24）
openSUSE 开启 SSHD （07/14/2012 10:17:34）

本文评论查看全部评论（0）