openSUSE 安装Bochs 2.6

在openSUSE 下安装Bochs 2.6笔记。1.到Bochs官方下载源码包，因为用到了调试功能。 Bochs 最新版下载地址 http://sourceforge.net/projects/bochs/2.安装G＋＋编译器如果不安装Ｇ＋＋编译器，在执行configure时就会出现一些错误。3.执行配置，开启调试和反汇编 ./configure --enable-debugger --enable-disasm4.ERROR: X windows gui was selected, but X windows libraries were not found.出现这个错误时，请安装xorg-dev包sudo apt - get install xorg - dev5.Package gtk+-2.0 was not found in the pkg-config search path.Perhaps you should add the directory containing `gtk+-2.0.pc"to the PKG_CONFIG_PATH environment variableNo package "gtk+-2.0" foundERROR: pkg-config was not found, or unable to access the gtk+-2.0 package.Install pkg-config and the gtk+ development package,or disable the gui debugger, or the wxWidgets display library （whichever is being used）.出现这个错误时，请运行：sudo apt - get install libgtk2 . 0 - dev6.重新执行配置（出错处理如上）./ configure-- enable - debugger-- enable - disasm然后运行makemake再installsudo make install我试过不用sudo来直接执行，会出错的，出错提示不明确，应该是权限不够make :***[install_bin] 错误17.完成，执行bochs，嘻嘻，来个www.linuxidc.com @linuxidc:~/Downloads/bochs-2.6> bochs
========================================================================
Bochs x86 Emulator 2.6
Built from SVN snapshot on September 2nd, 2012
Compiled on Nov 29 2012 at 18:01:48
========================================================================
00000000000i[ ] reading configuration from .bochsrc
00000000000p[ ] >>PANIC<< .bochsrc:190: unsupported CPU model option.
00000000000e[CTRL ] notify called, but no bxevent_callback function is registered
========================================================================
Bochs is exiting with the following message:
[ ] .bochsrc:190: unsupported CPU model option.
========================================================================
00000000000i[CPU0 ] CPU is in real mode （active）
00000000000i[CPU0 ] CS.mode = 16 bit
00000000000i[CPU0 ] SS.mode = 16 bit
00000000000i[CPU0 ] EFER = 0x00000000
00000000000i[CPU0 ] | EAX=00000000 EBX=00000000 ECX=00000000 EDX=00000000
00000000000i[CPU0 ] | ESP=00000000 EBP=00000000 ESI=00000000 EDI=00000000
00000000000i[CPU0 ] | IOPL=0 id vip vif ac vm rf nt of df if tf sf ZF af PF cf
00000000000i[CPU0 ] | SEG sltr（index|ti|rpl） base limit G D
00000000000i[CPU0 ] | CS:0000（ 0000| 0| 0） 00000000 00000000 0 0
00000000000i[CPU0 ] | DS:0000（ 0000| 0| 0） 00000000 00000000 0 0
00000000000i[CPU0 ] | SS:0000（ 0000| 0| 0） 00000000 00000000 0 0
00000000000i[CPU0 ] | ES:0000（ 0000| 0| 0） 00000000 00000000 0 0
00000000000i[CPU0 ] | FS:0000（ 0000| 0| 0） 00000000 00000000 0 0
00000000000i[CPU0 ] | GS:0000（ 0000| 0| 0） 00000000 00000000 0 0
00000000000i[CPU0 ] | EIP=00000000 （00000000）
00000000000i[CPU0 ] | CR0=0x00000000 CR2=0x00000000
00000000000i[CPU0 ] | CR3=0x00000000 CR4=0x00000000
bx_dbg_read_linear: physical memory read error （phy=0x0000000000000000, lin=0x00000000）
00000000000i[CTRL ] quit_sim called with exit code 1
www.linuxidc.com @linuxidc:~/Downloads/bochs-2.6>sudo: sorry, you must have a tty to run sudoLinux下的source命令相关资讯 Bochs Bochs 2.6 Bochs安装

Ubuntu 14.04 LTS 安装和配置Bochs （今 10:20）
在Ubuntu下用Bochs仿真freedos学习（05/29/2014 19:53:28）
CentOS 6.0 源码编译安装 Bochs （12/27/2012 12:11:05）

Ubuntu上使用Bochs （今 10:14）
Bochs 2.6 发布，开源 x86 虚拟机（03/05/2013 18:50:39）
Linux0.11 运行环境搭建以及调式-- （11/10/2012 14:25:07）

本文评论查看全部评论（0）

评论声明