Linux tar命令详解

最近在Linux下使用tar命令，老把参数弄混。遂决定写此文以备查询使用。在Linux下查看tar命令帮助：tar --help会出现一大片的信息，最后。Usage: tar [OPTION...] [FILE]...
GNU `tar" saves many files together into a single tape or disk archive, and can
restore individual files from the archive.Examples:
tar -cf archive.tar foo bar # Create archive.tar from files foo and bar.
tar -tvf archive.tar # List all files in archive.tar verbosely.
tar -xf archive.tar # Extract all files from archive.tar. Main operation mode: -A, --catenate, --concatenate append tar files to an archive
-c, --create create a new archive
-d, --diff, --compare find differences between archive and file system
--delete delete from the archive （not on mag tapes！）
-r, --append append files to the end of an archive
-t, --list list the contents of an archive
--test-label test the archive volume label and exit
-u, --update only append files newer than copy in archive
-x, --extract, --get extract files from an archive Operation modifiers: --check-device check device numbers when creating incremental
archives （default）
-g, --listed-incremental=FILE handle new GNU-format incremental backup
-G, --incremental handle old GNU-format incremental backup
--ignore-failed-read do not exit with nonzero on unreadable files
--level=NUMBER dump level for created listed-incremental archive
-n, --seek archive is seekable
--no-check-device do not check device numbers when creating
incremental archives
--no-seek archive is not seekable
--occurrence[=NUMBER] process only the NUMBERth occurrence of each file
in the archive; this option is valid only in
conjunction with one of the subcommands --delete,
--diff, --extract or --list and when a list of
files is given either on the command line or via
the -T option; NUMBER defaults to 1
--sparse-version=MAJOR[.MINOR]
set version of the sparse format to use （implies
--sparse）
-S, --sparse handle sparse files efficiently Overwrite control: -k, --keep-old-files don"t replace existing files when extracting
--keep-newer-files don"t replace existing files that are newer than
their archive copies
--no-overwrite-dir preserve metadata of existing directories
--overwrite overwrite existing files when extracting
--overwrite-dir overwrite metadata of existing directories when
extracting （default）
--recursive-unlink empty hierarchies prior to extracting directory
--remove-files remove files after adding them to the archive
-U, --unlink-first remove each file prior to extracting over it
-W, --verify attempt to verify the archive after writing it Select output stream: --ignore-command-error ignore exit codes of children
--no-ignore-command-error treat non-zero exit codes of children as
error
-O, --to-stdout extract files to standard output
--to-command=COMMAND pipe extracted files to another program Handling of file attributes: --acls Save the ACLs to the archive
--atime-preserve[=METHOD] preserve access times on dumped files, either
by restoring the times after reading
（METHOD="replace"; default） or by not setting the
times in the first place （METHOD="system"）
--delay-directory-restore delay setting modification times and
permissions of extracted directories until the end
of extraction
--group=NAME force NAME as group for added files
--mode=CHANGES force （symbolic） mode CHANGES for added files
--mtime=DATE-OR-FILE set mtime for added files from DATE-OR-FILE
-m, --touch don"t extract file modified time
--no-acls Don"t extract the ACLs from the archive
--no-delay-directory-restore
cancel the effect of --delay-directory-restore
option
--no-same-owner extract files as yourself （default for ordinary
users）
--no-same-permissions apply the user"s umask when extracting permissions
from the archive （default for ordinary users）
--no-selinux Don"t extract the SELinux context from the archive

--no-xattrs Don"t extract the user/root xattrs from the
archive
--numeric-owner always use numbers for user/group names
--owner=NAME force NAME as owner for added files
-p, --preserve-permissions, --same-permissions
extract information about file permissions
（default for superuser）
--preserve same as both -p and -s
--same-owner try extracting files with the same ownership as
exists in the archive （default for superuser）
-s, --preserve-order, --same-order
sort names to extract to match archive
--selinux Save the SELinux context to the archive
--xattrs Save the user/root xattrs to the archive Device selection and switching: -f, --file=ARCHIVE use archive file or device ARCHIVE
--force-local archive file is local even if it has a colon
-F, --info-script=NAME, --new-volume-script=NAME
run script at end of each tape （implies -M）
-L, --tape-length=NUMBER change tape after writing NUMBER x 1024 bytes
-M, --multi-volume create/list/extract multi-volume archive
--rmt-command=COMMAND use given rmt COMMAND instead of rmt
--rsh-command=COMMAND use remote COMMAND instead of rsh
--volno-file=FILE use/update the volume number in FILE Device blocking: -b, --blocking-factor=BLOCKS BLOCKS x 512 bytes per record
-B, --read-full-records reblock as we read （for 4.2BSD pipes）
-i, --ignore-zeros ignore zeroed blocks in archive （means EOF）
--record-size=NUMBER NUMBER of bytes per record, multiple of 512 Archive format selection: -H, --format=FORMAT create archive of the given format FORMAT is one of the following: gnu GNU tar 1.13.x format
oldgnu GNU format as per tar <= 1.12
pax POSIX 1003.1-2001 （pax） format
posix same as pax
ustar POSIX 1003.1-1988 （ustar） format
v7 old V7 tar format --old-archive, --portability
same as --format=v7
--pax-option=keyword[[:]=value][,keyword[[:]=value]]...
control pax keywords
--posix same as --format=posix
-V, --label=TEXT create archive with volume name TEXT; at
list/extract time, use TEXT as a globbing pattern
for volume name Compression options: -a, --auto-compress use archive suffix to determine the compression
program
-I, --use-compress-program=PROG
filter through PROG （must accept -d）
-j, --bzip2 filter the archive through bzip2
-J, --xz filter the archive through xz
--lzip filter the archive through lzip
--lzma filter the archive through lzma
--lzop
--no-auto-compress do not use archive suffix to determine the
compression program
-z, --gzip, --gunzip, --ungzip filter the archive through gzip
-Z, --compress, --uncompress filter the archive through compress Local file selection: --add-file=FILE add given FILE to the archive （useful if its name
starts with a dash）
--backup[=CONTROL] backup before removal, choose version CONTROL
-C, --directory=DIR change to directory DIR
--exclude=PATTERN exclude files, given as a PATTERN
--exclude-backups exclude backup and lock files
--exclude-caches exclude contents of directories containing
CACHEDIR.TAG, except for the tag file itself
--exclude-caches-all exclude directories containing CACHEDIR.TAG
--exclude-caches-under exclude everything under directories containing
CACHEDIR.TAG
--exclude-tag=FILE exclude contents of directories containing FILE,
except for FILE itself
--exclude-tag-all=FILE exclude directories containing FILE
--exclude-tag-under=FILE exclude everything under directories
containing FILE
--exclude-vcs exclude version control system directories
-h, --dereference follow symlinks; archive and dump the files they
point to
--hard-dereference follow hard links; archive and dump the files they
refer to
-K, --starting-file=MEMBER-NAME
begin at member MEMBER-NAME in the archive
--newer-mtime=DATE compare date and time when data changed only
--no-null disable the effect of the previous --null option
--no-recursion avoid descending automatically in directories
--no-unquote do not unquote filenames read with -T
--null -T reads null-terminated names, disable -C
-N, --newer=DATE-OR-FILE, --after-date=DATE-OR-FILE
only store files newer than DATE-OR-FILE
--one-file-system stay in local file system when creating archive
-P, --absolute-names don"t strip leading `/"s from file names
--recursion recurse into directories （default）
--suffix=STRING backup before removal, override usual suffix （"~"
unless overridden by environment variable
SIMPLE_BACKUP_SUFFIX）
-T, --files-from=FILE get names to extract or create from FILE
--unquote unquote filenames read with -T （default）
-X, --exclude-from=FILE exclude patterns listed in FILE File name transformations: --strip-components=NUMBER strip NUMBER leading components from file
names on extraction
--transform=EXPRESSION, --xform=EXPRESSION
use sed replace EXPRESSION to transform file
names File name matching options （affect both exclude and include patterns）: --anchored patterns match file name start
--ignore-case ignore case
--no-anchored patterns match after any `/" （default for
exclusion）
--no-ignore-case case sensitive matching （default）
--no-wildcards verbatim string matching
--no-wildcards-match-slash wildcards do not match `/"
--wildcards use wildcards （default）
--wildcards-match-slash wildcards match `/" （default for exclusion） Informative output: --checkpoint[=NUMBER] display progress messages every NUMBERth record
（default 10）
--checkpoint-action=ACTION execute ACTION on each checkpoint
--index-file=FILE send verbose output to FILE
-l, --check-links print a message if not all links are dumped
--no-quote-chars=STRING disable quoting for characters from STRING
--quote-chars=STRING additionally quote characters from STRING
--quoting-style=STYLE set name quoting style; see below for valid STYLE
values
-R, --block-number show block number within archive with each
message
--show-defaults show tar defaults
--show-omitted-dirs when listing or extracting, list each directory
that does not match search criteria
--show-transformed-names, --show-stored-names
show file or archive names after transformation
--totals[=SIGNAL] print total bytes after processing the archive;
with an argument - print total bytes when this
SIGNAL is delivered; Allowed signals are: SIGHUP,
SIGQUIT, SIGINT, SIGUSR1 and SIGUSR2; the names
without SIG prefix are also accepted
--utc print file modification dates in UTC
-v, --verbose verbosely list files processed
--warning=KEYWORD warning control
-w, --interactive, --confirmation
ask for confirmation for every action Compatibility options: -o when creating, same as --old-archive; when
extracting, same as --no-same-owner Other options: -？, --help give this help list
--restrict disable use of some potentially harmful options
--usage give a short usage message
--version print program versionMandatory or optional arguments to long options are also mandatory or optional
for any corresponding short options.The backup suffix is `~", unless set with --suffix or SIMPLE_BACKUP_SUFFIX.
The version control may be set with --backup or VERSION_CONTROL, values are: none, off never make backups
t, numbered make numbered backups
nil, existing numbered if numbered backups exist, simple otherwise
never, simple always make simple backupsValid arguments for the --quoting-style option are: literal
shell
shell-always
c
c-maybe
escape
locale
clocale*This* tar defaults to:
--format=gnu -f- -b20 --quoting-style=escape --rmt-command=/sbin/rmt
--rsh-command=/usr/bin/rshReport bugs to <bug-tar@gnu.org>.Linux netstat命令详解Linux strace命令详解相关资讯 linux常用命令 Linux tar tar命令详解 Linux解压命令 tar

常用的Linux命令（今 08:47）
Linux目录结构和常用命令（08月29日）
一些 Linux 常用命令说明（06月04日）

Linux 文件与目录的基本常用命令（09月03日）
Linux常用命令札记（08月14日）
Linux系统管理员常用命令实例分析（04月11日）

本文评论查看全部评论（0）