CentOS Linux解决Device eth0 does not seem to be present

在VMware里克隆出来的CentOS Linux。。ifconfig...没有看到eth0.。然后重启网卡又报下面错误。故障现象：service network restart
Shutting down loopback insterface: [ OK ]
Bringing up loopback insterface: [ OK ]
Bringing up interface eth0: Device eth0 does not seem to be present,delaying initialization. [FAILED]解决办法：首先，打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示：# vi /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x1022:0x2000 （pcnet32）
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="？*", ATTR{address}=="00:0c:29:8f:89:9
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x1022:0x2000 （pcnet32）
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="？*", ATTR{address}=="00:0c:29:50:bd:1
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"记录下，eth1网卡的mac地址00:0c:29:50:bd:17接下来，打开/etc/sysconfig/network-scripts/ifcfg-eth0# vi /etc/sysconfig/network-scripts/ifcfg-eth0将 DEVICE="eth0" 改成 DEVICE="eth1" ,
将 HWADDR="00:0c:29:8f:89:97" 改成上面的mac地址 HWADDR="00:0c:29:50:bd:17"最后，重启网络# service network restart
或者# /etc/init.d/network restart正常了。Linux中管道以及重定向关于RHEL6中ulimit的nproc限制相关资讯 CentOS教程 Device eth0

CentOS上使用Dropbox （02/07/2013 09:11:47）
CentOS 网络设置修改（02/04/2013 21:28:42）
CentOS如何安装whois命令（01/20/2013 14:33:29）

CentOS 下修改/dev/shm 大小解决（02/04/2013 21:30:15）
CentOS 注销在线用户, Linux 注销（02/04/2013 21:24:06）
CentOS安装完重启后不能进入终端（01/02/2013 16:04:02）

本文评论查看全部评论（0）